Requirements Of 400w Outdoor Ultra-thin Led Floodlights On Buildings


The above is the knowledge of LED flood light organized by 400w outdoor slim led floodlight manufacturer.

 

LED flood light is a kind of point light source, can illuminate the whole lake evenly, and can adjust the illumination. However, floodlighting is only one way to brighten buildings. It is by no means unique. Never say that façade lighting is non-flooding, façade lighting is not equal to flood lighting.

The color temperature of the LED flood light can be sensitively selected from 4000 to 7000K, and the imaging index can be as high as 80 or higher. The luminous color of the lamp is closer to natural light. The utilization rate of the light source of the LED lamp is very high, about 90% of the LED diode illumination angle can be consistent with the illuminator's viewpoint of the illuminator, so most of the illuminator light directly illuminates the designated area, and only a small part is reflected, so the light source is used The rate is high. The LED lamp has no delayed start time, can be connected at any time, and can work easily to complete intelligent energy-saving control at any time.

Buildings with flood lighting should have the following two conditions:

The first is that the appearance of the illuminated building should have a certain reflectivity. Floodlights use floodlights to illuminate the exterior of a building, and then through its reflection, people see the brightness from the direction of the survey.

The second is: the reflection outside the illuminated building is preferably diffuse reflection, at least it must be diffuse reflection, all appearances must have a certain amount of reflected light, and because the appearance of brightness is not the same, the reflection is different, roughly divided into directional Reflection, diffuse reflection and diffuse reflection.

The above is the knowledge of LED flood light organized by 400w outdoor slim led floodlight manufacturer.

 

Daha fazla..